Call Us

ACE Therma Supreme High Heat Resistant Aluminum Paint

ACE Therma Supreme High Heat Resistant Aluminum Paint

Product Details:

  • Usage Heat Resistant Paint
  • Physical Form Liquid
  • Supply Ability : 10000 Liter Per Month
1200 INR/Kilograms
X

Price And Quantity

  • 20 Liter
  • 350.00 - 450.00 INR/Kilograms
  • 1200 INR/Kilograms

Product Specifications

  • Liquid
  • Heat Resistant Paint

Trade Information

  • Kolkata
  • Telegraphic Transfer (T/T), Cash in Advance (CID), Cash Advance (CA)
  • 10000 Liter Per Month
  • 1 Week
  • Yes
  • Contact us for information regarding our sample policy
  • As Per Buyers Requirement & Order
  • All India
  • ISO 9001:2008

Product Description

Single pack, silicone/synthetic resin and Aluminum based heat resistant coating.

Features :

  • Heat resistant upto 900°C
  • Good water & weather resistance
  • Can be directly applied over aluminum /zinc metalized substrate or zinc silicate primer

Technical Specifications


Colour

Almunium

Finish

Eggshell

Volume solids

28 %

Recommended DFT / coat

15 – 20 mµ(app)

Theoretical covering capacity

-10-12 m2 /l @ 20 mµ DFT

Curing time at 30°C

Surface dry : 1 Hour
Hard dry : 16 Hours

Shelf life (cool & dry place)

12 months

Flash point

29°C

Directions for use

Over aluminum /zinc metalized surface; zinc silicate primer, should be dry & free from all surface Contamination, mist coat is recommended when applied over zinc silicate primer.

White rust must be removed for application over weathered zinc primers thorough water scrubbing / high-pressure water jetting.

Surface temperature must be at least 3°C above dew point but not above 50 °C


Mixing:

Single pack product. Homogenous mixing by proper method is necessary before application.

Application:


Brush


  • Recommended thinner : WP Thinner No. 9
  • Volume of thinner : 0 - 10 %

Air spray

  • Recommended thinner : wp Thinner No. 9.
  • Volume of thinner : 0 - 10 %
  • Nozzle orifice : 1.5 - 3.0 mm
  • Nozzle pressure : 0.3 - 0.4 MPas

 

Airless spray


  • Recommended thinner : wp Thinner No. 1
  • Volume of thinner :0-5%
  • Nozzle orifice : 0.28 - 0.33 mm
  • Nozzle pressure : 10 – 13 MPas

WASSER POLYMER PVT LTD

* Tips on getting accurate quotes. Please include product name, order quantity, usage, special requests if any in your inquiry.



Back to top
WASSER POLYMER PVT. LTD. All Rights Reserved.(Terms of Use)
Developed and Managed by Infocom Network Ltd.