Call Us
Epoxy Based Zinc Phosphate Primer

Epoxy Based Zinc Phosphate Primer

350.00 - 450.00 INR/Liter

Product Details:


Price And Quantity

  • 350.00 - 450.00 INR/Liter
  • 20 Liter

Product Specifications

  • Liquid
  • Protective Coatings

Trade Information

  • Kolkata
  • Telegraphic Transfer (T/T) Cash in Advance (CID) Cheque Cash Advance (CA)
  • 10000 Liter Per Month
  • 1 Week
  • Yes
  • Contact us for information regarding our sample policy
  • As Per Buyers Requirement & Order
  • All India
  • ISO 9001:2008

Product Description

This epoxy primer is a two pack polyamide-cured, air drying, high build product with zinc phosphate pigment.

Features of Epoxy Based Zinc Phosphate Primer:

  • Primer for ferrous and non-ferrous metals made of epoxy
  • You can spray a film up to 400 microns thick in one coat
  • Water and corrosion resistance in a saline atmosphere and industrial environment
  • Wet and flow characteristics are good
  • Primer for tank lining systems
  • Surfaces can be topped with conventional coatings 

Surface Preparation and Substrate Condition of Epoxy Based Zinc Phosphate Primer:

  • Rust, loose scale, mill scale must be removed from the surface; best results can be achieved by sandblasting to Sa 2, or by cleaning using power tools to St 3.
  • There must be at least three degrees Celsius above dew point, but no higher than fifty degrees Celsius.

Mixing of Epoxy Based Zinc Phosphate Primer:

Separately stir the base and hardener to get a uniform mixture. Add hardener to the base slowly while stirring constantly to ensure a quick and homogeneous mixture.

  • Mixing ratio: Base : Hardener :: 3 :1(v/v)
  • Induction time: 30 minutes
  • Pot life at 30 degrees Celsius: 8 hours

Technical Specifications of Epoxy Based Zinc Phosphate Primer


Red oxide and Green etc.



Volume Solids

: 50 - 125 mµ

Recommended DFT / coat

150 - 200 mµ(app)

Theoretical covering capacity

7 to 9 m2/Ltr. @ 50 mµ DFT.

Curing time at 30°C

Surface dry : 30 minute

Hard dry : 16 hours

Full cure : 7 days

Shelf life (cool & dry place)

12 months(app).

Flash point

Base : < 28°C

Hardener : < 28°C

Application of Epoxy Based Zinc Phosphate Primer:


Recommended thinner

Vib Thinner No. 8

Volume of thinner

0 - 10 %

Air spray

Recommended thinner

Vib Thinner No. 8.

Volume of thinner

5 - 20 %

Nozzle orifice

1.5 - 3.0 mm

Nozzle pressure

0.3 - 0.4 MPas

Airless spray

Recommended thinner

Vib Thinner No. 8.

Volume of thinner

0 - 15 %

Nozzle orifice

0.41 - 0.48 mm

Nozzle pressure

20 - 24 MPas

Other Products in 'Epoxy Paints' category

Back to top

RFQ Request For Quotation
Get Quotes For Your Buying Requirement. Tell Suppliers What You Need.
I agree to abide by all the Terms and Conditions of
trade india member
WASSER POLYMER PVT. LTD. All Rights Reserved.(Terms of Use)
Developed and Managed by Infocom Network Private Limited.