Call Us

High Gloss Metal Poly Urethane Coating

High Gloss Metal Poly Urethane Coating

Product Details:

  • Chemical Name Polyurethane
  • Type Paint
  • Physical Form Liquid
  • Supply Ability : 10000 Liter Per Month
350.00 - 450.00 INR/Liter
X

Price And Quantity

  • 20 Liter
  • 350.00 - 450.00 INR/Liter

Product Specifications

  • Polyurethane
  • Paint
  • Liquid

Trade Information

  • Kolkata
  • Telegraphic Transfer (T/T), Cheque, Cash in Advance (CID), Cash Advance (CA)
  • 10000 Liter Per Month
  • 1 Week
  • Yes
  • Contact us for information regarding our sample policy
  • All India
  • ISO 9001:2008

Product Description

High Gloss Metal Poly Urethane Coating is an anti-corrosive liquid chemical solvent which is used to provide a shield over different types of objects to protect them against environmental attacks. It consist of an isocyanate group which acts as a base material for the production of this chemical. The solvent has a good reactivity helps to provide a good bonding between the additives and other constituents present to provide a uniformity and high adhesion with the surface on which it is going to be applied. High Gloss Metal Poly Urethane Coating provides excellent finish and high gloss with a good resistance against abrasion. 

Product Description:

Two component, air drying, acrylic aliphatic polyurethane coating.

Features :

  • Excellent finish with high gloss.
  • Excellent colour & gloss retension.
  • Excellent outdoor durability.
  • Tough, abrasion resistant coating with excellent flow and leveling charecterestics.
  • Good resistance to chemicals and polluted environments.

Technical details

Color

: Wide Range

Gloss

: High Gloss/ Matte

Volume solids

: Approx 50%.

Recommended DFT / coat

: 35 - 50 mµ

Theoretical covering capacity

: 13 to 15 m2/l @ 35mµ

Curing time at 30ºC

: Surface dry : 30 Mins.

: Hard dry : 16 hours

: Full cure : 7 days

Shelf life (cool & dry place)

: 12 months(min)

Flash point

: Base : < 28ºC

: Hardener : < 28ºC

Surface Preparation & Substrate Condition

  • Can be applied on epoxy primer, epoxy /polyurethane undercoat; surface must be dry & free from all surface contamination. Surface of aged epoxy coating should be sufficiently roughened prior to painting.
  • Substrate temperature should be at least 3°C above dew point but not above 50°C.
  • Stir the base and hardener separately to get an uniform mix, then add hardener slowly to the base slowly with constant stirring for quick homogenous mixing.

Mixing ratio

Base : Hardener :: 4:1(v/v)

Induction time

25 minutes

Pot life at 30°

3 hours


Application:

Brush

  • Recommended thinner : Tufthin 9
  • Volume of thinner : 0 - 10 %

Air spray

  • Recommended thinner : Tufthin 9.
  • Volume of thinner : 5 - 20 %
  • Nozzle orifice : 1.5 - 3.0 mm
  • Nozzle pressure : 0.3 - 0.4 MPas

Airless spray

  • Recommended thinner : Tufthin 9
  • Volume of thinner : 0 - 15 %
  • Nozzle orifice : 0.41 - 0.48 mm
  • Nozzle pressure : 20 - 24 MPas



WASSER POLYMER PVT LTD

* Tips on getting accurate quotes. Please include product name, order quantity, usage, special requests if any in your inquiry.



Back to top
WASSER POLYMER PVT. LTD. All Rights Reserved.(Terms of Use)
Developed and Managed by Infocom Network Ltd.