Any wood finish or polyurethane paint has the primary purpose of protecting and preserving the wood. There are some people who prefer a gloss or luster finish, however, not everyone does. Others prefer the raw, unfinished appearance of wood. You can achieve a matte wood finish easily by using polyurethane matte finish paint. This paint is suitable for creating finish coats on epoxy as well as polyurethane systems. With excellent abrasion resistance, this paint is suitable for conditions in coastal as well as industrial areas. This matte finish paint resists water, saline water and mild chemicals.
Two component, air drying, acrylic aliphatic polyurethane matt coating.
Finish coat on epoxy and polyurethane systems.
Ideal for coastal and industrially polluted exposure conditions.
Very good abrasion resistance
Resistance to splash & spillage of water/saline water and mild chemicals.
Color | Range 25 shades. |
Gloss | Matt - EggshellVolume |
solids | Approx. |
50%Recommended DFT / coat | 35 - 50 mµ |
Theoretical covering capacity DFT | 10 to 15 m2/l @ 35mµ |
Curing time at 30ºC | Surface dry : 1 hour |
Hard dry : 8 hours | |
Full cure : 7 days | |
Shelf life (cool & dry place) | 6 months(min) |
Flash point | Base :< 28ºC |
Hardener :< 28ºC |
Mixing ratio | Base : Hardener :: 10:1(v/v) |
Induction time | 25 minutes |
Pot life at 30° | 3 hours |
Brush / Roller | |
Recommended thinner | Vib Thinner No. 9 |
Volume of thinner | 0 - 10 % |
Air spray | |
Recommended thinner | Vib Thinner No. 9 |
Volume of thinner | 5 - 20 % |
Nozzle orifice | 1.5 - 3.0 mm |
Nozzle pressure | 0.3 - 0.4 Mpas |
Airless spray | |
Recommended thinner | Vib Thinner No. 9 |
Volume of thinner | 5 - 15 % |
Nozzle orifice | 0.41 - 0.48 mm |
Nozzle pressure | 20 – 24 MPas |
|
|
![]() |
WASSER POLYMER PVT. LTD.
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Private Limited. |